Sandy River No24
(Single Exhaust from July 2012) but please check your loco.
Please note that some early locos have short exhaust stubs and will need a longer pipe - please contact your supplier.
Vale of Rheidol
Late batches only (with Z exhaust) and the exhaust needs to be sent to D P Supplies for modification.
A Chuffer which is a direct replacement for the Darjeeling Garratt with the same outsede diameter. A slightly larger FX Control version is also available
Katie, Russell, Lady Anne etc. from August 2012
Ruby types (also see SCAC1-S below)
Mimi, Forney, Excelsior, Leader
This is the same fitting as the SCAC1 but uses the narrower 7/32" (5.5mm) Chuffer. It is best for modified Rubies where there is a narrow (10mm down) diameter stack. Please note SCGP10 is the Chuffer for the Ruby 5
Lawley Edrig Caradoc Mortimer Wrekin
Superior Joan WD Baldwin Ragleth
2 Cyl Shay - both versions
Baldwin 4-4-0 K-27 C-25
3 Cyl Shay
Climax - Straight Stack
S-12 0-6-0 (1:32 scale)
EBT No. 12
7/8ths Quarry hunslet
K4 1:29 Scale
AML 0-6-0 1:29 Scale
(two lengths - please check "E" Measurement here)
Accucraft C-25, Fairymead, 3 ton Decauville
AML 0-4-0 Tender Engine
DPP&P 2-8-0 smaller stack
SCAC36a and b
The Victorian Railways NA Class
a for straight stack, b for tapered stack
Gauge One 61XX
Hunslet No 14
7/8ths scale Bagnall
For 1/8" (3.2mm) Exhausts with 30mm of tube.
Mamod loco (original series)
PPS / RWM Janet
Regner Lumberjack, Vincent
Aster Kraus (fits inside exhaust)
Some Roundhouse see left
For 5/32" (4mm) Exhausts with 30mm of tube
Locobox Darj Garratt
Aster/LGB Frank S
For 3/16" Exhausts
with 40mm of tube
Cheddar (see also below):
(Please check exhaust)
For 3/16" exhausts and chimneys with an ID of 14mm or more. It gives a deeper sound.
Reisa, Samson, Hercules, Goliath
This is a new version of the SCGP1 for 1/8" exhausts but with a smaller 7/32" (5.55mm) diameter Chuffer for narrow chimneys between 8.5 and 9.5mm internal diameter, e.g. Merlin Mayflower.The chimney must have an internal length of 47mm.
It is suitable for the New Mamod Mk II
This is a version for 1/8" exhausts but with an even smaller 3/16" diameter Chuffer for very narrow chimneys between 8 and 8.5 mm internal diameter. The chimney must have an internal length of 47mm.
This is a version for twin exhaust locos with tall but narrow chimneys between 8 and 8.5mm. This will usually be locos using Roundhouse cylinders such as Brian Wilson's "Jack"
This Chuffer is for locos with short wide chimney with an Internal Diameter of 14mm and length of 30mm. it is supplied with 50mm of tube to fit 4mm exhausts.
This is for twin exhaust locos with tall but narrow chimneys of 9mm -9.5mm internal diameter - such as the Simply 7/8ths Henry, which is a Roundhouse Billy conversion.
(where a single exhaust is used, then the SCGP4-25 is used)
This is a standard 1/4" Chuffer with a precision drilled fitting for 3mm tube as used on most Accucraft locos. It is the Chuffer for the Accucraft BR 45.
This is a mini chuffer to fit locos with very limited chimney space. It fits in the spark arrester top of the Accucraft Ruby 5 and needs just 20mm of 12mm ID chimney.
This is for the Roundhouse twin exhaust cylinders. It is 88mm long, making it suitable for 7/8ths locos, such as Brian Wilson's Jack as serialised in Garden Rail Magazine. It also fits early, short exhaust, Roundhouse locos. The Chuffer is 7/32" diameter which leaves room dor the FX Control.
Wrightscale Alice class Hunslet